Samples of some Past Powder Coating Jobs

*brightside* · Sun, September 14th, 2008, 10:10 AM

Here you go,

Intercooler piping for a DSM

I'll be posting some more later this week.

Thanks,
Mike

*brightside* · Sun, September 14th, 2008, 10:44 AM

Couple More,

*Osad* · Sun, September 14th, 2008, 03:46 PM

Quote:

Originally Posted by brightside

Are these all FJ20's? Friggin SWEET!

CSK-240-R1 · Sun, September 14th, 2008, 05:04 PM

hey i would be interested in getting the passanger footpegs powdercoated, very small surface area, what kind of charge would i be looking at

*sidewayz240* · Sun, September 14th, 2008, 05:56 PM

Quote:

Originally Posted by Osad

Are these all FJ20's? Friggin SWEET!

No dan, come on now... Nissan covers always say nissan on em, Thats a 4G63 or something of the like.

*brightside* · Sun, September 14th, 2008, 07:20 PM

Yeah, there all 4g63 out of dsm's aka talons/eclipses/EVOs.

I'm workong on some Nissan covers right now. I'm doing one Mirror Black and Metallic Gold. I'll post the pictures once complete.

*matty* · Sun, September 14th, 2008, 07:26 PM

Quote:

Originally Posted by Osad

Are these all FJ20's? Friggin SWEET!

an ugly comment from what i can only assume is an equally ugly person

Silvia_Drift · Sun, September 14th, 2008, 07:31 PM

Quote:

Originally Posted by matty

an ugly comment from what i can only assume is an equally ugly person

LOL! Dan I hope you were joking...

Silvia_Drift · Sun, September 14th, 2008, 07:32 PM

And does sanding down the letters on the valve covers cost extra?

*Osad* · Sun, September 14th, 2008, 07:56 PM

Quote:

Originally Posted by sidewayz240

No dan, come on now... Nissan covers always say nissan on em, Thats a 4G63 or something of the like.

Damnit.

Quote:

Originally Posted by matty

an ugly comment from what i can only assume is an equally ugly person

F U. Asswad.

Quote:

Originally Posted by Silvia_Drift

LOL! Dan I hope you were joking...

No I wasn't. I thought I knew what I was talking about. But I didn't.

*sidewayz240* · Sun, September 14th, 2008, 08:09 PM

Quote:

Originally Posted by Osad

No I wasn't. I thought I knew what I was talking about. But I didn't.

Same old.

*Osad* · Sun, September 14th, 2008, 08:55 PM

Quote:

Originally Posted by sidewayz240

Same old.

Ow. My feelings...

*brightside* · Sun, September 14th, 2008, 09:27 PM

Enough of that guys.

Letters or anything that is raised can either be polished or just sanded down. PM me and let me know what you have in mind and i can give you a price.

*S13counterpart* · Mon, September 15th, 2008, 03:56 AM

I can't find a pitcture of what I'm talking about but I'll do my best to describe it.
I don't know what it's called either.

Can you powder coat stuff in this stuff.
It has a really cool texture. It's usually black on the bottom. And any colour on top. The top colour looks like it was splashed on randomly.

Sorry for the crao description. I've been searching for it but since I don't know what it's called it's kinda hard, lol.

*Jammin1911* · Tue, September 16th, 2008, 06:17 PM

^^ I think he means vein

*brightside* · Tue, September 16th, 2008, 09:27 PM

Now that description makes sense! Yes, that would be a vein finish. I have some silver vein that i have not even tried yet.

*Lucas[GTC]* · Tue, September 16th, 2008, 11:20 PM

Do you do extreme metalics colour? large flake ect...

frankduxx · Thu, September 25th, 2008, 05:06 AM

what would be a turn around on a valve cover? and cost

*brightside* · Thu, September 25th, 2008, 09:30 AM

The turn around varies based on the job and what else i got going on but it is usually under a week.

Price varies based on what you like done and the colour you choose.

I have a lot of Nissan valve covers that i can use as cores now if its a valve cover your looking to do.

*S13counterpart* · Sun, September 28th, 2008, 07:19 PM

Quote:

Originally Posted by brightside

Now that description makes sense! Yes, that would be a vein finish. I have some silver vein that i have not even tried yet.

Sorry for the delayed reply.

When you have a sample of that vein stuff would you mind posting up some pics?
I've got a few things I'd like to try with that stuff if it turns out well!

Stiky · Fri, October 10th, 2008, 02:02 AM

How much for a flat black ka24 valve cover with white lettering?

*brightside* · Fri, October 10th, 2008, 11:37 AM

it would be 60 for the flat black and another 30 to do the lettering in mirror white. I have to cut a stencil around the letter in order to do the lettering, its a pain in the ass but doable.

*brightside* · Fri, October 10th, 2008, 11:46 AM

i also have KA valve cover cores, I just can't tell the difference between a s13 and an s14 cover.

Which is the one with the bigger holes on the corner?

Stiky · Sat, October 11th, 2008, 12:13 AM

Ahh true, how much would a premade one be?

*Pants* · Sat, October 11th, 2008, 06:29 PM

Quote:

Originally Posted by brightside

i also have KA valve cover cores, I just can't tell the difference between a s13 and an s14 cover.

Which is the one with the bigger holes on the corner?

the s14 ka valve cover has a offset hole on the right rear also the holes are in a different location on top

also i have a s13 sr valve cover i mant to get done

blue with metal flake

like the cusco blue

*brightside* · Sat, October 11th, 2008, 07:58 PM

I've been able to find a close match to the cusco blue as i've got another guy requesting it but its a bit lighter in colour but it has the same sparkle to it as the original cusco sparkle metallic. Here it is on a corvette caliper.

*Pants* · Sat, October 11th, 2008, 09:04 PM

thats awesome

how much

*DirrtyDevvo* · Sat, October 11th, 2008, 09:23 PM

Is it a special flake you use for powdercoating? I have some house of kolor flake that was used in my paint, would that be something you can use to get a close match of the exterior of my car.

*S13counterpart* · Sun, October 12th, 2008, 01:25 AM

The third picture down. This is that veiny like stuff I was talking about...

http://www.240sxforums.com/forums/1294975-post34.html

*brightside* · Sun, October 12th, 2008, 08:56 AM

Ya i've got that colour just haven't tried it out yet. I did use a titanium vien a couple weeks back for a honda cover.

Here's 2 pictures of the honda cover.

semd me a PM and i can give you a price.

Thanks,
Mike

*brightside* · Sun, October 12th, 2008, 08:58 AM

I pretty sure its the same bases of stuff for the flake. I'm unsure if it will take the heat of the curing process. I'd be will to try the stuff out it you brought it over.

*SpHiNxXx* · Fri, October 17th, 2008, 03:17 AM

do you do rims as well?? if so any pics??

*polishprince* · Fri, October 17th, 2008, 10:19 AM

saw some of the work at the year end meet... looks great

*brightside* · Fri, October 17th, 2008, 10:35 AM

I really need to remember to take more pictures of stuff before returning stuff to people. The next set of rims i will make sure to take pictures and hopefully soon i will have time to finish my own.

*Pants* · Fri, October 17th, 2008, 10:41 PM

how much to powder coat a set of 18s

240less.. · Sat, October 18th, 2008, 04:12 PM

I just got a cover coated by Mike.

It is mint! I can't wait to send him the rest of my crap i need done.

Thanks Mike!

rogerthat240 · Mon, October 20th, 2008, 10:44 AM

You need wrinkle non shiny red

*Polar_s13* · Thu, October 30th, 2008, 01:40 AM

Got z32 calipers painted candy apple red and nissan logo was machined, good price and good work+ great guy!

*Pants* · Fri, October 31st, 2008, 02:08 PM

post pics^^^

*Polar_s13* · Mon, November 3rd, 2008, 12:14 AM

*87s15lt1* · Sun, November 9th, 2008, 08:21 PM

balla status +10 points with any of the above. that stuff is GORGEOUS. i love powder coated shit.

nice work dude! i will definetley show my dad these pics. he wants a whole bunch of stuff done for his track car.

Ryan · Mon, November 10th, 2008, 08:35 PM

you do some pretty nice work man. i think ill come to you for some work...

*brightside* · Tue, November 11th, 2008, 11:29 AM

Thanks for the kind words everybody.

looks like i'm going to be pretty busy this winter with alot of your guys projects.

I'm placing another larger order of powder from the US so now i will be stocking over 50 colours!

breaker77 · Sun, March 29th, 2009, 08:32 PM

How much for a KA valve cover done in satin wrinkle black?

chuckles · Sun, March 29th, 2009, 09:00 PM

Mike is awesome.

look at what he did to GTR calipers after powder coating them glossy black, polishing the letters and then clear coating it twice.

sorry for the bad quality, i took it using my bb

*matty* · Wed, April 29th, 2009, 09:16 PM

what do you have in the area's of purple?
like a dark midnight purple, kinda like GT-R factory purple

*brightside* · Wed, April 29th, 2009, 11:07 PM

Matty,

Don't have any purples of that sort in stock but i can order the colour in for you if you'd like. Have an example of the colour?

jdmnoob · Wed, May 27th, 2009, 07:29 PM

do you do subframes too!?!?!

*kollo* · Wed, May 27th, 2009, 07:39 PM

^yes he does

drivenautosports · Wed, July 15th, 2009, 04:49 AM

hi there, i have a s13 ka24de, id like to get the valve cover powdercoated in yellow, i would like a very glossy or sparkly finish if possible. please pm me what you can do, and how much. i am available to give it to you asap. thanks

Sun, September 14th, 2008, 10:10 AM	#1
brightside Join Date: Aug 2008 Posts: 75 iTrader:	Samples of some Past Powder Coating Jobs Here you go, Intercooler piping for a DSM I'll be posting some more later this week. Thanks, Mike

Sun, September 14th, 2008, 07:32 PM	#9
Silvia_Drift Registered User Join Date: Oct 2004 Location: Mississauga Posts: 1,479 iTrader:	And does sanding down the letters on the valve covers cost extra? __________________ '93 SilVert 13.7@106mph '91 Silvia 13.6@102mph

Tue, September 16th, 2008, 06:17 PM	#15
Jammin1911 Join Date: Oct 2002 Location: Oakville Posts: 4,537 iTrader:	^^ I think he means vein __________________ www.DigTrackDays.com *DIG For Victory.*

Fri, October 10th, 2008, 02:02 AM	#21
Stiky Registered User Join Date: Mar 2008 Location: Richmond Hill, Ontario, Canada Posts: 1,862 iTrader:	How much for a flat black ka24 valve cover with white lettering? __________________ Chris Price 1990 Skyline Sedan GTS-T Type M (Daily) 1989 RB Powered Hatch (Sold) 1991 Sil40 (Scrapped) 1989 Coupe (Sold)

Sat, October 11th, 2008, 12:13 AM	#24
Stiky Registered User Join Date: Mar 2008 Location: Richmond Hill, Ontario, Canada Posts: 1,862 iTrader:	Ahh true, how much would a premade one be? __________________ Chris Price 1990 Skyline Sedan GTS-T Type M (Daily) 1989 RB Powered Hatch (Sold) 1991 Sil40 (Scrapped) 1989 Coupe (Sold)

Sun, September 14th, 2008, 10:44 AM	#2
brightside Join Date: Aug 2008 Posts: 75 iTrader:	Couple More,

Sun, September 14th, 2008, 05:04 PM	#4
CSK-240-R1 Registered User Join Date: Apr 2008 Location: Holland Landing Posts: 1,644 iTrader:	hey i would be interested in getting the passanger footpegs powdercoated, very small surface area, what kind of charge would i be looking at

Sun, September 14th, 2008, 07:20 PM	#6
brightside Join Date: Aug 2008 Posts: 75 iTrader:	Yeah, there all 4g63 out of dsm's aka talons/eclipses/EVOs. I'm workong on some Nissan covers right now. I'm doing one Mirror Black and Metallic Gold. I'll post the pictures once complete.

Sun, September 14th, 2008, 09:27 PM	#13
brightside Join Date: Aug 2008 Posts: 75 iTrader:	Enough of that guys. Letters or anything that is raised can either be polished or just sanded down. PM me and let me know what you have in mind and i can give you a price.

Mon, September 15th, 2008, 03:56 AM	#14
S13counterpart Join Date: Oct 2007 Location: Barrie, Ontario Posts: 1,055 iTrader:	I can't find a pitcture of what I'm talking about but I'll do my best to describe it. I don't know what it's called either. Can you powder coat stuff in this stuff. It has a really cool texture. It's usually black on the bottom. And any colour on top. The top colour looks like it was splashed on randomly. Sorry for the crao description. I've been searching for it but since I don't know what it's called it's kinda hard, lol.

Tue, September 16th, 2008, 09:27 PM	#16
brightside Join Date: Aug 2008 Posts: 75 iTrader:	Now that description makes sense! Yes, that would be a vein finish. I have some silver vein that i have not even tried yet.

Tue, September 16th, 2008, 11:20 PM	#17
Lucas[GTC] Join Date: Nov 2005 Posts: 1,777 iTrader:	Do you do extreme metalics colour? large flake ect...

Thu, September 25th, 2008, 05:06 AM	#18
frankduxx Registered User Join Date: Apr 2007 Posts: 432 iTrader:	what would be a turn around on a valve cover? and cost

Thu, September 25th, 2008, 09:30 AM	#19
brightside Join Date: Aug 2008 Posts: 75 iTrader:	The turn around varies based on the job and what else i got going on but it is usually under a week. Price varies based on what you like done and the colour you choose. I have a lot of Nissan valve covers that i can use as cores now if its a valve cover your looking to do.

Fri, October 10th, 2008, 11:37 AM	#22
brightside Join Date: Aug 2008 Posts: 75 iTrader:	it would be 60 for the flat black and another 30 to do the lettering in mirror white. I have to cut a stencil around the letter in order to do the lettering, its a pain in the ass but doable.

Fri, October 10th, 2008, 11:46 AM	#23
brightside Join Date: Aug 2008 Posts: 75 iTrader:	i also have KA valve cover cores, I just can't tell the difference between a s13 and an s14 cover. Which is the one with the bigger holes on the corner?

Sat, October 11th, 2008, 07:58 PM	#26
brightside Join Date: Aug 2008 Posts: 75 iTrader:	I've been able to find a close match to the cusco blue as i've got another guy requesting it but its a bit lighter in colour but it has the same sparkle to it as the original cusco sparkle metallic. Here it is on a corvette caliper.

Sat, October 11th, 2008, 09:04 PM	#27
Pants Join Date: Jul 2006 Location: Brampton, Ontario Posts: 3,356 iTrader:	thats awesome how much __________________

Sat, October 11th, 2008, 09:23 PM	#28
DirrtyDevvo Join Date: Aug 2005 Location: Mississauga Posts: 1,880 iTrader:	Is it a special flake you use for powdercoating? I have some house of kolor flake that was used in my paint, would that be something you can use to get a close match of the exterior of my car.

Sun, October 12th, 2008, 01:25 AM	#29
S13counterpart Join Date: Oct 2007 Location: Barrie, Ontario Posts: 1,055 iTrader:	The third picture down. This is that veiny like stuff I was talking about... http://www.240sxforums.com/forums/1294975-post34.html

Sun, October 12th, 2008, 08:56 AM	#30
brightside Join Date: Aug 2008 Posts: 75 iTrader:	Ya i've got that colour just haven't tried it out yet. I did use a titanium vien a couple weeks back for a honda cover. Here's 2 pictures of the honda cover. semd me a PM and i can give you a price. Thanks, Mike __________________ Brightside Coatings mike@brightsidecoatings.com 416-570-8893

Sun, October 12th, 2008, 08:58 AM	#31
brightside Join Date: Aug 2008 Posts: 75 iTrader:	I pretty sure its the same bases of stuff for the flake. I'm unsure if it will take the heat of the curing process. I'd be will to try the stuff out it you brought it over. __________________ Brightside Coatings mike@brightsidecoatings.com 416-570-8893

Fri, October 17th, 2008, 03:17 AM	#32
SpHiNxXx Join Date: Jul 2007 Location: Brampton Posts: 763 iTrader:	do you do rims as well?? if so any pics?? __________________ 1990 Nissan Pulsar GTiR 2.0L AWD TURBO

Fri, October 17th, 2008, 10:19 AM	#33
polishprince Join Date: Feb 2008 Posts: 698 iTrader:	saw some of the work at the year end meet... looks great __________________ Why is it that when I google a problem with the sr, the first response always says "this is a common problem with the sr20..."

Fri, October 17th, 2008, 10:35 AM	#34
brightside Join Date: Aug 2008 Posts: 75 iTrader:	I really need to remember to take more pictures of stuff before returning stuff to people. The next set of rims i will make sure to take pictures and hopefully soon i will have time to finish my own. __________________ Brightside Coatings mike@brightsidecoatings.com 416-570-8893

Fri, October 17th, 2008, 10:41 PM	#35
Pants Join Date: Jul 2006 Location: Brampton, Ontario Posts: 3,356 iTrader:	how much to powder coat a set of 18s __________________

Sat, October 18th, 2008, 04:12 PM	#36
240less.. Registered User Join Date: Dec 2006 Posts: 117	I just got a cover coated by Mike. It is mint! I can't wait to send him the rest of my crap i need done. Thanks Mike!

Mon, October 20th, 2008, 10:44 AM	#37
rogerthat240 Permanently Banned Join Date: Apr 2008 Posts: 1,098 iTrader:	You need wrinkle non shiny red

Thu, October 30th, 2008, 01:40 AM	#38
Polar_s13 Join Date: Mar 2006 Location: Toronto, Etobicoke Posts: 1,702 iTrader:	Got z32 calipers painted candy apple red and nissan logo was machined, good price and good work+ great guy! __________________ s13 Red ext. Black Suede int. Sr20det. ~~Going all out. The way it should be done~~

Fri, October 31st, 2008, 02:08 PM	#39
Pants Join Date: Jul 2006 Location: Brampton, Ontario Posts: 3,356 iTrader:	post pics^^^ __________________

Mon, November 3rd, 2008, 12:14 AM	#40
Polar_s13 Join Date: Mar 2006 Location: Toronto, Etobicoke Posts: 1,702 iTrader:	__________________ s13 Red ext. Black Suede int. Sr20det. ~~Going all out. The way it should be done~~

Sun, November 9th, 2008, 08:21 PM	#41
87s15lt1 Join Date: Jun 2008 Location: Brampton Posts: 3,263 iTrader:	balla status +10 points with any of the above. that stuff is GORGEOUS. i love powder coated shit. nice work dude! i will definetley show my dad these pics. he wants a whole bunch of stuff done for his track car. __________________ '93 RB20DET Hatch 5-speed 2009 - 216WHP. 2010 ??? '88 S10 4x4 LB4 5-speed 2010 - ??? '87 383 stroker S15 3-speed - estimated 1400ft.lbs - year...unknown

Mon, November 10th, 2008, 08:35 PM	#42
Ryan Registered User Join Date: Mar 2007 Location: Ontario Posts: 370 iTrader:	you do some pretty nice work man. i think ill come to you for some work... __________________ Balance is Key

Tue, November 11th, 2008, 11:29 AM	#43
brightside Join Date: Aug 2008 Posts: 75 iTrader:	Thanks for the kind words everybody. looks like i'm going to be pretty busy this winter with alot of your guys projects. I'm placing another larger order of powder from the US so now i will be stocking over 50 colours! __________________ Brightside Coatings mike@brightsidecoatings.com 416-570-8893

Sun, March 29th, 2009, 08:32 PM	#44
breaker77 Registered User Join Date: Nov 2006 Location: Newmarket Posts: 1,607 iTrader:	How much for a KA valve cover done in satin wrinkle black? __________________ 89 Hatch - Silver/Blue - sr20